Chemipro SAN 1L

• cleans tanks and equipment and prevents mineral build-up
• is not affected by organic pollution
• only 60 seconds of surface contact time is required.
• not suitable for soft metals and CIP systems

dosage: from 15 to 25 ml / 10 liters
Directions for use: Use as a rinse after thorough cleaning with a good alkaline detergent such as Chemipro Wash.

Use 15-25 ml of Chemipro San per 10 liters of water. Apply to the surface and clean with a cloth, sponge, soak or spray. Rinse only with clean potable water

After use, close the package tightly and store in a dry, cool and well-ventilated place. To prevent leakage, always store the package in an upright position.

Do not mix Chemipro San with chlorinated cleaning agents as chlorine gas will form.